Maintenance and Support
Only the exterior surfaces of the device should be cleaned. The process for cleaning and disinfection at a patient change is to:
- Disconnect the device from its power supply.
- Clean the exterior surfaces with a damp cloth and a mild detergent, then wipe them dry.
- Surface disinfect the module and station's exterior shells using a recommended solution, paying close attention to the areas near the patient output, fresh air inlet, keyboard, and station handle.
- Allow the product to dry completely before its next use.
Routine maintenance by a trained technician is required54.
- Every 6 months: The air filter should be checked and replaced if necessary, and the double limb circuit adapter membrane should be checked if used.
- Every 25,000 hours of use: The turbine should be replaced by a qualified EOVE technician, or when a service notification is displayed.
Repairs and servicing should only be performed by an authorized EOVE service representative or a qualified and certified service representative. You can contact EOVE at security@eove.fr for security incidents, or consult their website, www.eove.fr, or call their helpline at +33 05 59 21 86 84 for training and support.