Respireo™ Hospital F disposable & reusable
Face masks for hospital use
The Respireo™ Hospital F mouth-nose mask is a range of masks with and without leaks, entirely designed for non-invasive respiratory support of the patient. This mouth-nose mask is specifically dedicated to hospital use. It ensures the well-being of the patient thanks to an adjustable and comfortable harness. Its quick release system allows the lower straps of the harness to be quickly removed if necessary. The mask is designed in particular with biocompatible silicone and does not include latex or phthalates.
This equipment is available in a version with or without intentional leakage and is compatible with different models of ventilators.
The Respireo™ Hospital F Reusable mask is reusable on several patients, and exists in a version without intentional leakage. The mask can be regenerated up to 20 times using one of the following methods:
- high level thermal disinfection
- high level chemical disinfection
- sterilization in an autoclave at 121°C for a maximum of 20 minutes
The sling must be replaced between each patient.
Hospital mouth-nose mask
The Respireo™ Hospital F range is intended for single patient or multi-patient use in a hospital environment. This respirator mask for the hospital allows a safe management by clinicians. The design, materials and assembly of this mouth-nose mask have been designed to meet the needs of people suffering from respiratory disorders in the context of hospital treatment.
Different sizes are available to suit as many patients as possible and offer them maximum comfort. The mask is available in 3 sizes (S, M and L).
Its adjustable harness and dial allow the mask to be optimally adapted to different physiognomies and face sizes.
Respireo™ Hospital F mask: the highlights
The Respireo™ Hospital F hospital naso-oral mask allows:
- Ensure effective, non-invasive and comfortable ventilation;
- To guarantee safe use;
- Simplify traceability and therefore save time
A hospital mask compatible with different respirators
The Respireo™ Hospital F respiratory mask has been developed to adapt to different models of invasive and non-invasive ventilation devices. This equipment is compatible with the following ventilators:
- Monnal™ T50
- Monnal™ T60
- Monnal™ T75
- Extend™
A hospital mask that is easy to fit and remove
The Respireo™ Hospital F hospital breathing mask is easily installed by following three steps:
1) Turn the knob of the front wedge to the maximum
2) Install the harness, then if necessary, adjust the inclination of the front branch using the wheel
3) Insert the two quick-release clips into the slots provided for this purpose on the body of the mask, and adjust the harness until the mask adheres comfortably to the face while ensuring a good seal. If necessary, re-adjust the bottom straps to eliminate any leaks (be careful not to over-tighten).
Respireo™ Hospital F Vented disposable is an oronasal mask with calibrated exhalation orifices intended to be used for short time periods (less than 7 days) in a hospital setting by a single adult patient (weighing over 30 kg), who has been prescribed for a non-invasive positive pressure ventilation therapy (NIPPV), e.g. continuous positive airway pressure therapy (CPAP) or Bilevel positive airway pressure therapy (BiPAP).
Respireo™ Hospital F Non Vented disposable is an oronasal mask without calibrated exhalation orifices intended to be used, for short time periods (less than 7 days) in a hospital setting, by a single adult patient (weighing over 30 kg) in controlled non-invasive positive pressure ventilation (NIPPV).
Respireo™ Hospital F Non Vented disposable with anti-asphyxia valve is an oronasal mask without calibrated exhalation orifices and with an anti-suffocation valve, intended to be used for short time periods (less than 7 days) in a hospital setting by a single adult patient (weighing over 30 kg) in controlled non-invasive positive pressure ventilation (NIPPV).
Respireo™ Hospital F Non Vented reusable is a reusable oronasal mask without calibrated exhalation holes intended for use in hospital settings by multiple adult patients (weighing more than 30 kg) under Non-invasive Positive-Pressure Ventilation (NPPV).
Medical device class IIa CE0051.
Please read the instructions for use.
Manufactured by Air Liquide Medical Systems S.r.l., Italy.
Distributed by Air Liquide Medical Systems S.A., Antony 348 921735 R.C.S Nanterre.
Documents
-
Respireo™ Hospital F Non Vented Disposable - User Manual
Download the document PDF (1.42 MB) -
Respireo™ Hospital F Non Vented Reusable - User Manual
Download the document PDF (946.33 KB)Download the document PDF (1.38 MB) -
Decontamination, disinfection and sterilization guide for masks
Download the document PDF (3.57 MB) -
Respireo™ Hospital F - Brochure
Download the document PDF (1.79 MB)